DomainK Posted May 25, 2013 Posted May 25, 2013 I have MTNL connection and I have an MTNL router attached to an iBall baton for wifi. The problem is that when I am attempting to access the wifi router using 192.168.1.1 , it's directly connecting to the MTNL router. Solution? How to access the iBall baton wifi control panel?
Crookbond Posted May 25, 2013 Posted May 25, 2013 I have MTNL connection and I have an MTNL router attached to an iBall baton for wifi. The problem is that when I am attempting to access the wifi router using 192.168.1.1 , it's directly connecting to the MTNL router. Solution? How to access the iBall baton wifi control panel? You have two routers?
DomainK Posted May 25, 2013 Author Posted May 25, 2013 You have two routers? MTNL modem connected to iBall baton for wifi.
Crookbond Posted May 25, 2013 Posted May 25, 2013 MTNL modem connected to iBall baton for wifi. That's tricky! Suggestion - You may want to use the iBall Baton directly.
DomainK Posted May 25, 2013 Author Posted May 25, 2013 That's tricky! Suggestion - You may want to use the iBall Baton directly. Problem is that I disconnected MTNL, connected to iBall baton with a wire and still I can't access it's control panel with 192.168.1.1. It's just not responding.
Crookbond Posted May 25, 2013 Posted May 25, 2013 Problem is that I disconnected MTNL' date=' connected to iBall baton with a wire and still I can't access it's control panel with 192.168.1.1. It's just not responding.[/quote'] OK - Are you using DHCP or a static IP? In case, you are using a static IP - change to DHCP in your network settings and try to access the iBall Baton. In addition, are you sure your iBall router hardware is functional? You may want to hard reset the router - there will be a small pinhole which you will have to press. It will also help if you tell me your OS and model number of your router (in case you don't know link me to the product on the Internet).
Clarke Posted May 25, 2013 Posted May 25, 2013 If you run ipconfig command on command prompt (start=>run=>cmd), what's your default gateway IP address ?
Mariyam Posted May 26, 2013 Posted May 26, 2013 If you run ipconfig command on command prompt (start=>run=>cmd)' date=' what's your default gateway IP address ?[/quote'] Typically Lonavala, Amby Valley and Kolad are the default getaways for most people from Mumbai.
Clarke Posted May 26, 2013 Posted May 26, 2013 Typically Lonavala' date=' Amby Valley and Kolad are the default getaways for most people from Mumbai.[/quote'] That explains it; DK most likely did not take his router on his getaway and the annoyed iball won't work as a gateway. The solution is to take the router to Goa and buy it some ice cream/beer depending on its age.
nospam Posted May 26, 2013 Posted May 26, 2013 If you run ipconfig command on command prompt (start=>run=>cmd)' date=' what's your default gateway IP address ?[/quote'] Change the default gateway on your iBall wifi router from 192.168.1.1 to 192.168.2.1 (disconnect MTNL first). So next time you can access your iBall using 192.168.2.1.
Holysmoke Posted May 27, 2013 Posted May 27, 2013 Typically Lonavala' date=' Amby Valley and Kolad are the default getaways for most people from Mumbai.[/quote'] This is class!:cantstop:
Yoda-esque Posted May 27, 2013 Posted May 27, 2013 Thanks a lot guys. Problem is solved. Sowhat did you do ?
DomainK Posted May 27, 2013 Author Posted May 27, 2013 Sowhat did you do ? Reset the iBall by pressing the unlock key. Now I can access it if the MTNL is switched off.
Swing_n_Speed Posted May 27, 2013 Posted May 27, 2013 Reset the iBall by pressing the unlock key. Now I can access it if the MTNL is switched off. So it was Dexter with the winning advice!
DomainK Posted May 27, 2013 Author Posted May 27, 2013 So it was Dexter with the winning advice! Dexter is the best. :two_thumbs_up:
Desi Cartman Posted May 27, 2013 Posted May 27, 2013 Dexter is the best. :two_thumbs_up: Yea, till he decides to kill you
Recommended Posts